Specifications - Laney LC30-112 Operating Instructions Manual

SPECIFICATIONS

Supply Voltage
Mains Fuse
HT Fuse
Power Consumption
Output Power Rating
Loudspeaker
Loudspeaker outputs
Features
Footswitchable
Reverb
EQ
Input Impedance
Size (H*W*D)
Unit Weight
This product conforms to the requirements of the following European Regulations, Directives & Rules:-
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal
household waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the
WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.
~100V, ~120V, ~230V, ~240V 50/60Hz Factory Option
(~220V>240V = T630mA L 250V) (~100>120V = T1.6A L 250V)
T315mA L
100W
30W
12" Celestion 8 Ohms
Extension speaker socket
Pure Class A Valve tone
4xEL84 Power Tubes
4x12AX7/ECC83 Preamp tubes
Hi & Lo Gain Inputs
FX Loop with Switchable Level & By-pass
Channel and Reverb
Digital Reverb
Passive Bass, Middle and Treble
Bright Switch
Modern Switch
1MOhm/47pF
451*558*278 (Base)
20Kg
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (2004/108/EEC),
RoHS (EU2002/95/EC), WEEE (EU2002/96/EC)
(Minimum 8 Ohm Impedance)
(Matched Quad Set)
(FS2 Optional)
(Separate EQ for Clean and Drive)