Unpacking And Checking Equipment; S Upplied A Ccessories - Kenwood NEXEDGE NX-700 series Instruction Manual

UNPACKING AND CHECKING EQUIPMENT

Note: The following unpacking instructions are for use by your Kenwood dealer, an authorized
Kenwood service facility, or the factory.
Carefully unpack the transceiver. We recommend that you identify the items listed in
the following table before discarding the packing material. If any items are missing
or have been damaged during shipment, file a claim with the carrier immediately.
S A
upplied cceSSorieS
Microphone (with cable)
Microphone hanger
(with 4 x 6 mm self-tapping screws)
DC power cable
• Fuse (5 A)
Mounting bracket
Screw set:
• 5 x 6 mm self-tapping screw (4 pieces)
• Hex-headed screw with washer (4 pieces)
• Spring washer (4 pieces)
• Flat washer (4 pieces)
Instruction manual
Microphone
(with cable)
DC power cable
Item
Mounting bracket
Part Number
T9-0639-XX
J9-584-XX
E30-7523-XX
F52-0024-XX
J29-0726-XX
N99-2068-XX
B62-2000-XX
Microphone hanger
(with 4 x 6 mm self-tapping screws)
Quantity

 set

2



Screw set