Setting The Time - La Crosse Technology WS-9055TWC Instruction Manual

1. Install 2 AA batteries in the remote
temperature sensor. Make sure they
do not spring free, or start-up
problems may occur.
2. Install 2 AA batteries in the indoor
weather station. Do not press any
buttons for
at least
fifteen
minutes.

Setting the time

1. Press and hold the "SET" key for 4
seconds.
2. The hour will flash.
3. Press and release the "+" key to
advance the hour.
4. Press and release the "SET" key.
5. The minute is flashing.
6. Press and release the "+" key to
advance the minutes.
7