Operation Using Cable Connection Or Wireless 433Mhz - La Crosse Technology WS-2308AL Operation Manual

Professional remote weather station

Hide thumbs Also See for WS-2308AL:

Operation manual (20 pages)

Table of Contents

Setting up using the AC adaptor:

Power up all the sensors as described in setting up using

batteries above

Using the AC adaptor (included), plug it into the mains outlet and

power up the base station by inserting the adaptor jack into the

DC 6.0V socket located on the side of the base station

Every time the thermo-hygro sensor is powered up (for example after

a change of batteries), a random security code is transmitted and this

code must be synchronized with the base station to receive weather

data.

When the base station is powered up, a short beep will sound and all

LCD segments will light up for about 5 seconds before it enters into a

15 minute learning mode to learn the sensors security code. After the

learning mode (or by pressing the MIN/MAX key at anytime), the base

station will start the WWVB radio controlled time reception.

Note for WWVB Radio Controlled Time:

The time and date display is based on the signal provided by the

highly accurate government operated atomic clock in Ft. Collins,

Colorado. This radio-controlled clock does not only provide for the

weather station's time and date display but also functions as the time

and date source for all of this weather station's memory and history

values using time and date information.

E.L. backlight:

When using the power adapter or under battery operation, the E.L.

backlight will switch on for 15 seconds when any button is pressed.