Maintenance; Specifications - Sharp XL-HP600E Operation Manual

Maintenance

XL-HP600E
! Cleaning the tape-handling parts
" Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
" When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
Pinch roller
Capstan
" After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
! Cleaning the CD pickup lens
Poor performance during CD playback (skipping or jumping) can be
caused by a dirty or contaminated CD laser pick up lens. If this hap-
pens then the use of a commercially available CD lens cleaning
discs may restore normal operation. Contact your supplier or local
CD software dealer to obtain CD lens cleaning discs. Ensure all
included instructions/documentation are carefully followed.
! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunctions.
30

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
Power source
A B B A
D
C
Power
consumption
Dimensions
Weight
Erase head
Recording/Playback head (*) This power consumption value is obtained when the demon-
! Amplifier
Output power
Output terminals
Input terminals
AC 230 V, 50 Hz
Power on: 128 W
Power stand-by: 0.6 W (*)
Width: 205 mm (8-1/8")
Height: 260 mm (10-1/4")
Depth: 366 mm (14-7/16")
7.2 kg (15.9 lbs.)
stration mode is cancelled in the power stand-by mode. Refer
to page 11 to cancel the demonstration mode.
RMS: 150 W (75 W + 75 W) (10 % T.H.D.)
RMS: 126 W (63 W + 63 W) (0.9 % T.H.D.)
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Subwoofer (audio signal): 200 mV/10 k
ohms at 70 Hz
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
03/1/31 XL-HP600E(E)3.fm