Firmware Numbers Page (C0H) - Seagate SCSI Interface Product Manual

96
Table 62: Device identification page example
Bytes Hexadecimal values
00–15 00 83 00 32
16–31 53 75 70 65
32–47 32 30 33 34
48–53 CD FF FF 23
Notes: a) Non-printing ASCII characters are shown as periods (.).
b) Byte 00 is the beginning of the VPD page (see Table 57).
c) Byte 04 is the beginning of the Identification descriptor for the Vendor ID based identifier
(Identifier type 1, see Table 61).
d) Byte 42 is the beginning of the Identification descriptor for the EUI-64 identifier (Identifier
type 2, see Table 61).
5.6.6

Firmware Numbers page (C0h)

Table 63 applies to drives that do not supply a servo RAM release number and date and a ROM release date.
Table 64 applies to model families other than those covered by Table 63.
Table 63: Firmware Numbers page (C0h)
Bit 7
Byte
0 Peripheral Qualifier [1]
1 Page Code (C0h) [2]
2 0
3 Page Length (18h) [3]
4
: SCSI Firmware Release Number [4]
11
12
: ASCII space characters
19
20
: Servo ROM Release Number [4] [5]
27
Notes.
[1] The Peripheral Qualifier field and Peripheral Device Type field value of 00h indicates a direct-access
device (magnetic disc) is connected to this logical unit.
[2] Page C0h provides the firmware release numbers for the drive (see Table 64).
[3] The Page Length field specifies the length of the product firmware numbers. If the allocation length is too
small to transfer all of the page, the page length shall not be adjusted to reflect the truncation.
[4] The firmware release numbers fields contain ASCII data. The least significant ASCII character of the drive
firmware number shall appear as the last byte of a successful data transfer.
[5] For drives that return only 28 bytes.
02 01 00 22
72 20 54 75
35 38 39 33
45 67
6 5
0 0
SCSI Interface Product Manual, Rev. J
58 59 5A 5F 43 6F 72 70 ...2...XYZ_Corp
72 62 6F 20 44 69 73 6B Super Turbo Disk
34 35 01 02 00 08 01 AB 2034589345.....
4 3
Peripheral Device Type [1]
0 0
ASCII values
.....
2 1
0 0
0
0