Connecting your M3 Station Series
Installation
Verify that the computer meets the minimum system requirements as outlined in #System Requirements.
Connect the Data cable to your desktop/laptop computer as shown in the figure below.
Connecting a M3 Station Series
2
Plug in the power adapter and connect the USB cable to the corresponding port on your desktop PC or notebook PC.
Power on a M3 Station Series
4
Turn the power on your drive with power dial.
Now you can enjoy your drive.
To use the M3 Station 3.0 model at its Maximum speed, you need a PC or a Host Card that supports USB 3.0 interface.
M3 Station Series External Hard Drive
1
3
M3 Station Series will not power on
when the USB Cable disconnected.
User Manual
8