Connecting your STORY Station Series
Installation
Verify that the computer meets the minimum system requirements as outlined in #System Requirements.
Connect the Data cable to your desktop/laptop computer as shown in the figure below.
USB
Figure 1. Connecting a STORY Station Series
2
Plug in the power adapter and connect the USB cable to the corresponding port on your desktop PC or notebook PC.
Figure 2. Power on a STORY Station Series
LED Color
- USB 2.0 : Green or white
- USB 3.0 : Blue
Turn the power on your drive with power dial.
Now you can enjoy your drive.
To use the STORY Station 3.0 model at its Maximum speed, you need a PC or a Host Card that supports USB 3.0 interface.
STORY Station Series External Hard Drive
1
4
3
STORY Station Series will not power on
when the USB Cable disconnected.
User's Manual
5
8