Scag Power Equipment SVR Series Illustrated Parts Manual page 17

Section 8
Ref.
Part No. Description
No.
1 462240 Instrument Panel w/Decal
2 483957 Switch, PTO - 10 Amp
3 48798 Key Switch
4 48017-03 Lockwasher, 5/8" Internal Tooth
5 48017-04 Nut, 5/8-32 Special
6 462069 Key Chain w/ Keys
483609 Key w/Shroud
7 483976 Choke Control, SVR
8 483975 Throttle Control, SVR
9 04003-43 Bolt, Carriage #10-24 x 1/2"
10 04021-26 Locknut, #10-24
11 483537 Hourmeter
12 04001-06 Bolt, Hex Head 1/4-20 x .63
13 04019-02 Nut, Serrated Flange 1/4-20
14 *484076 Wire Harness, SVR (see below)
484157 Wire Harness, SVR
15 482543 Wire Harness Adapter, Kawasaki
16 *481545 Switch, Interlock (see below)
481637 Switch, Interlock
17 483642 Double Fuse Assy. (incl. #18, 19, 20)
18 483571 Cover, Sealed Double
19 48298 Fuse, 20 Amp
20 483629 Fuse Holder
482588 Clip (not shown)
21 483473 Switch, Double Pole - Plunger
22 462166 Clutch w/Tag
23 Battery (not avail. through Scag)
24 48126 Rubber Boot
25 48029-07 Cable, Battery Black 18"
26 48029-06 Cable, Battery Red 18"
27 04001-01 Bolt, Hex Head 1/4-20 x 3/4"
28 04020-02 Nut, 1/4-20
29 481545 Switch, Interlock
*
Used on machines with a serial number in the following ranges only.
• SVR36A-20FX with a serial number of E8200001 to E8200040
• SVR48V-24FX with a serial number of E8300001 to E8300030
• SVR52V-26FX with a serial number of E8400001 to E8400030
ELECTRICAL SYSTEM
15
R