Technical Specifications - Scag Power Equipment SWU Operator's Manual

MODELS
ENGINE
General Type:
Brand / Model:
Horsepower:
Type:
Displacement:
Cylinder:
Governor:
Air Cleaner:
Exhaust:
Fuel Pump Group:
Oil Pump Group:
Starter/Electrical:
ENGINE DECK
Thickness:
Fuel Tank:
Drive Wheels/Tires:
Handle Bars:
DRIVE SYSTEM
Type:
Transmissions:
Steering/Travel Control:
Brakes:
Axles:
Wire Harness:
Safety Group:
Forward Speed Range:
Reverse Speed Range:
Date of Issue: March, 1999
Specifications Subject to Change Without Notice

TECHNICAL SPECIFICATIONS

SWU36-15KH, SWU48-17KA
Heavy duty industrial/commercial
Kohler CV15T, Kawasaki FH500V
Kohler CV15T = 15HP maximum @ 3600 RPM
Kawasaki FH500V = 17HP maximum @ 3600RPM
Kohler = 4 cycle gas, single cylinder, overhead valve, vertical shaft engine
Kawasaki = 17HP 4 cycle, air cooled, V twin cylinder, vertical shaft engine
Kohler = 426 cc
Kawasaki = 494 cc
Kohler = 1 cast-iron liner
Kawasaki = 2 cast-iron sleeves
Mechanical type governor with variable speed control. Settings:
Kohler = 3600 rpm (+/-75rpm), idle set at 1200 rpm (+/- 75 rpm)
Kawasaki = 3600 rpm(+/- 75rpm), idle set at 1550 rpm (+/- 75 rpm)
Kohler = Large capacity duel element with cyclonic-type air filter
Kawasaki = Semi-cyclone type with dual element
Single canister side mount muffler.
Kohler = Mechanical fuel pump with in-line fuel filter
Kawasaki = Pulse-type fuel pump with in-line fuel filter
Kohler = Full pressure lubrication with full flow oil filter and positive
displacement Gerotor™ oil pump
Kawasaki = Full pressure lubrication with oil filter
Electronic ignition with recoil starter
7 gauge steel.
5 gallon (19.0 liters) seamless polyethylene.
15.0 x 6.0-6 two-ply pneumatic tubeless.
1-1/4" diameter.
Belt drive with twin power belts for increased friction to pulley surface and
"Adjust-A-Grip" traction control lever with three settings
Peerless 5-speed transmission, Model #700-070A with 9 spline coupler shaft
Clutch/brake fingertip steering, key lock switch. ("Adjust-A-Grip"
design allows minimum hand force to operate controls)
6" drum, band brake, one on each wheel.
1"
14 gauge wire.
Hand actuated operator presence system with blade clutch and
transmission interlock to engine kill
1.5 to 7.0 mph
3.0 mph
11