Manual Tuning - Sangean DT-120 Operating Instructions Manual

Manual Tuning

Turn on the radio, select desired band
by pressing POWER/BAND button.
D e s i r e d s t a t i o n m a y b e s e l e c t e d
b y t u r n i n g t h e Tu n i n g j o g w h e e l
intermittently until the desired station
is reached. Or turning and holding
the Tuning jog wheel until the desired
station is reached.
M e m o r y Tu n i n g ( S t a t i o n
preset)
Turn on the radio by pressing and
holding POWER/BAND button. Select
required band by pressing POWER/
BAND button. Tune to the desired
station using the Scan or Manual tuning
steps described above. When the
desired station is reached, press and
hold Memory button (1-5) for more than
2 seconds until display M x stop flashing
followed with a beep (via earphone). It
will replace previous memory station.
You may store 5 memory stations in
each band (AM, FMI, FMII).
7