Summary of Contents for SanDisk SSD UATA 5000 1.8”
Page 1
ACA CLASS B COMPLIANCE REPORT SanDisk Corporation 7 Atir Yeda Street Kfar Saba, Israel 972-9-7644908 Contact: Eitan Chalfon SanDisk SSD UATA 5000 1.8” February 7, 2007 Report Prepared By: EMC Lab Coordinator: Jon Wilson Rhein Tech Laboratories, Inc. : 2006137...
Page 2
Client: SanDisk Corporation, Inc. Address: 7 Atir Yeda Street Kfar Saba, Israel 972-9-7644908 Equipment Identification Type of Equipment: Information Technology Equipment Equipment Models: SanDisk SSD UATA 5000 1.8” Equipment Serial Number: N/A Equipment Description: ATA Storage Device Supplier/Manufacturer: SanDisk Corporation, Inc.
DECLARATION OF CONFORMITY WITH AUSTEL TECHNICAL STANDARDS NUMBER: 2006137 I/We (name of company representative responsible for the permit) (Australian Company or Agent Name) Australian Company Name (ACN)________________________________ hereby declare, under our sole responsibility, that all product supplied by this organization is customer equipment of the same type as that for which the permit/verification of permit was issued.
Company Name: Sandisk Corporation Eut: SanDisk SSD UATA 5000 1.8” Client Reference Number: QRTL06-334 Work Order Number: 2006137 ABLE OF ONTENTS GENERAL INFORMATION/TEST FACILITY AND METHODOLOGY ..........5 ............................5 EVIATIONS ......................5 CCREDITATION TATEMENTS SYSTEM TEST CONFIGURATION ...................... 6 ........................
The following Class B Application for ACA Compliance is prepared on behalf of SanDisk Corporation, Inc.. in accordance with AS/NZS CISPR22:2002. The Equipment Under Test (EUT) was the SanDisk SSD UATA 5000 1.8”. The test results reported in this document relate only to the item that was tested.
2006137 SYSTEM TEST CONFIGURATION RODUCT ESCRIPTION SanDisk SSD UATA 5000 1.8” is a drop-in replacement for the hard disk drive. It has no moving/ mechanical parts. Small form factor o 1.8" small form factor supporting unformatted capacity of 32GB o 8mm case height...
Company Name: Sandisk Corporation Eut: SanDisk SSD UATA 5000 1.8” Client Reference Number: QRTL06-334 Work Order Number: 2006137 ESTED YSTEM ETAILS Listed below are the identifiers and descriptions of all equipment, cables, and internal devices used with the EUT for this test.
XERCISE ESCRIPTION The SanDisk SSD UATA 5000 1.8” was installed in a Class B laptop personal computer which was running Windows XP. The computer was programmed to transfer files continuously, to and from the device under test using a software application provided by Dell. The SanDisk SSD UATA 5000 1.8”...
Company Name: Sandisk Corporation Eut: SanDisk SSD UATA 5000 1.8” Client Reference Number: QRTL06-334 Work Order Number: 2006137 PRODUCT LABELING The compliance label indicates that the product complies with the applicable standard and establishes a traceable link between the equipment and the manufacturer, importer or their agent responsible for compliance and for placing it on the Australian market.
Company Name: Sandisk Corporation Eut: SanDisk SSD UATA 5000 1.8” Client Reference Number: QRTL06-334 Work Order Number: 2006137 CONDUCTED EMISSIONS Neutral Conductor Temperature: 74°F Humidity: 40% Emission T e s t Analyzer S i t e Emission CISPR B CISPR B...
Company Name: Sandisk Corporation Eut: SanDisk SSD UATA 5000 1.8” Client Reference Number: QRTL06-334 Work Order Number: 2006137 RADIATED EMISSIONS ADIATED MISSIONS ESULTS Temperature: 50°F Humidity: 68% Emission T e s t Antenna Turntable Antenna Analyzer S i t e...
Company Name: Sandisk Corporation Eut: SanDisk SSD UATA 5000 1.8” Client Reference Number: QRTL06-334 Work Order Number: 2006137 IELD TRENGTH ALCULATION The field strength is calculated by adding the Antenna Factor and Cable Factor, and subtracting the Amplifier Gain (if any) from the measured reading. The basic equation with a sample...
Company Name: Sandisk Corporation Eut: SanDisk SSD UATA 5000 1.8” Client Reference Number: QRTL06-334 Work Order Number: 2006137 EQUIPMENT LIST The following is a list of equipment Rhein Tech uses to perform testing. Part Type Manufacturer Model Serial Number Barcode...
Company Name: Sandisk Corporation Eut: SanDisk SSD UATA 5000 1.8” Client Reference Number: QRTL06-334 Work Order Number: 2006137 CONDUCTED AND RADIATED TEST METHODOLOGY ONDUCTED MISSIONS EASUREMENTS The power line conducted emission measurements were performed in a Series 81 type shielded enclosure manufactured by Rayproof.
Page 18
Company Name: Sandisk Corporation Eut: SanDisk SSD UATA 5000 1.8” Client Reference Number: QRTL06-334 Work Order Number: 2006137 Compliance Report Page 18 of 17...