L1200 And L2000 Features - Samson LI200 Owner's Manual

4 bus mixing console with usb i/o & 24bit digital effects
Table of Contents

Advertisement

L1200 and L2000 Features

The Samson L1200 and L2000 consoles are
comprehensive and great sounding, making them
the ideal choice for a variety of live sound and
recording applications. Here are some of their main
features:
• The L1200 and L2000 are twelve and twenty
channel mixers in ergonomically correct, table-
top enclosures providing easy to see and easy to
operate front panel controls.
• Ample inputs, the L1200 has eight mic/line inputs
plus two stereo line inputs, while the L2000
features sixteen four mic/line inputs plus two
stereo line inputs. Plus dedicated stereo returns
for the onboard effects.
• Two additional mic preamplifiers on the stereo
channels brings the total number of mic inputs to
ten on the L1200 and eighteen on the L2000.
• On board, bi-directional USB interface for
recording to a computer based Hard Disk system.
The Output routing can be selected from MAIN
mix or AUX 1 - 2, and the Input routing can be
from the MAIN mix or last stereo channel.
• Custom designed, smooth feel 60mm faders on
all channels, buses, mono and left and right main
outputs.
• The L series have 24-bit DSP (Digital Signal
Processor) multi-effects processors with 100
selectable presets offering dazzling studio quality
effects including Reverb, Delay, Chorus and
Flanging.
• The L Series mixers feature high-quality, low-
noise, discrete microphone pre-amplifiers that
can accept signals from most any standard
microphone. Condenser microphones are
connected easily using the available 48 Volt
Phantom Power.
• Each of the L1200 and L2000's mono mic / line
channels feature Gain control, Low Cut filter, a
three-band equalizer with variable mid-range
control enabling you to tailor the tonal response
of each input, and a convenient Insert Point jack
to patch in external effects.
• The L Series has 4 auxiliary sends. Two dedicated
pre -fader aux sends for monitors, plus a third aux
send that can be set up to be either a monitor
send or an effects send using the Pre/Post switch,
and an additional EFX send for sending to the
internal multi-effects processors.
• Twelve segment LED Meters which can be
switched to display Main left and right or PFL and
Solo.
• The brilliant sound quality is achieved thanks to
the advanced circuit design, utilizing low-noise
operational amplifiers and low impedance busing.
• Durable steel enclosure is road tough insuring
reliable performance from night to night and
venue to venue.
• Three-year extended warranty.
2 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

L2000

Table of Contents