Linking Multiple S•Phones - Samson S-phone Owner's Manual

S•phone Connections
LINKING MULTIPLE S•phones
Any number of S•phones' can be linked together (daisy-chained), allowing you to monitor an input signal over
more than twelve sets of headphones, or to give individual musicians more control over their own headphone
mix. To do this, simply follow these basic steps:
• Make a connection between one S•phone's Left/Right Link outputs and the next one's Left/Right Main
inputs.
MINIMUM IMPEDANCE 8 OHMS
CHANNEL 4
OUTPUTS
HEADPHONE
MIXER/AMP
MINIMUM IMPEDANCE 8 OHMS
CHANNEL 4
OUTPUTS
HEADPHONE
MIXER/AMP
Because the S•phone Stereo Link output jacks are electronically balanced, we recommend the use of 3-conduc-
tor cable and 1/4" TRS (Tip/Ring/Sleeve) connectors. Even when several S•phones are linked together this way,
there is no loss of power or audio fidelity—every Channel on every S•phone will sound just as loud and clear as if
it were the only unit connected. The status of the front-panel Stereo/2 CH buttons affects only that unit and has
no effect on any subsequent linked units.
MINIMUM IMPEDANCE 8 OHMS MINIMUM IMPEDANCE 8 OHMS
CHANNEL 3 CHANNEL 2
OUTPUTS OUTPUTS
MINIMUM IMPEDANCE 8 OHMS MINIMUM IMPEDANCE 8 OHMS
CHANNEL 3 CHANNEL 2
OUTPUTS OUTPUTS
12
MINIMUM IMPEDANCE 8 OHMS
CHANNEL 1 LINK OUTPUT
OUTPUTS LEFT RIGHT
MINIMUM IMPEDANCE 8 OHMS
CHANNEL 1 LINK OUTPUT
OUTPUTS LEFT RIGHT
LEFT MONO
MAIN INPUT
LEFT RIGHT
LEFT MONO
MAIN INPUT
LEFT RIGHT