Product Compliance; Safety Information - Salus SBMV22 Instruction Manual

Salus SBMV22 (2 port 22mm) Manual.qxd:Layout 1 9/1/11 10:57 Page 3

PRODUCT COMPLIANCE

This product complies with the essential requirements of the following EC Directives:
• Electro-Magnetic Compatibility Directive 2004/108/EC
• Low Voltage Directive 2006/95/EEC
• EC Marking Directive 93/68/EEC

SAFETY INFORMATION

These instructions are applicable to the Salus Controls model stated on the front cover of this manual only, and
must not be used with any other make or model.
These instructions are intended to apply in the United Kingdom only, and should be followed along with any
other statutory obligations.
This accessory must be fitted by a Competent person, and installation must comply with the guidance provided
in the current editions of BS7671 (IEE Wiring Regulations) and Part 'P' of the Building Regulations. Failure to
comply with the requirements of these publications could lead to prosecution.
Always isolate the AC Mains supply before removing or refitting the actuator assembly.
Please leave these instructions with the end user where they should be kept in a safe place for future reference.
SBMV22 INSTRUCTION MANUAL 3