Salus SP120 Instruction Manual page 17

SP120 Manual Ver 005.qxd:Layout 1 6/1/11 09:00 Page 17
The SERVICE indicator will be displayed on all the SERVICE menu screens. The first SERVICE screen
will prompt you to enter a 3 digit access code – this code is very important, as once set it will be
needed to turn SERVICE mode on or off. The default service code is set to 000.
If you forget the code, then you will need to contact Salus Controls technical support. Once the code
has been entered, the next menu screen allows you to set the next service date for the system. Set the
date in the order day, month and year:
Confirm the setting using the OK key, or press the Arrow key to return to the previous screen display.
After enabling SERVICE mode, there is a screen that will allow you to enter an 11 digit number – this
feature is intended for you to enter your telephone number so that the end user can contact you
when the next service is due. The number is entered in the same way as the code – scroll with the
Touch Ring until you reach the required number, then confirm by pressing the OK key.
SP120 INSTRUCTION MANUAL 17