Kyocera Virgin Rise User Manual page 31

(Unshifted) to make all letters in a word lowercase.
(One-character-shifted) to capitalize only the first letter of a word.
(Caps Lock) to make all letters in a word uppercase.
2. Enter text using the keyboard.

If you make a mistake, touch
to erase an entire word.

Touch the key for the characters you want to enter.

Touch and hold to enter the character located at the upper right corner of the key.
Confirm the character you want to enter is displayed and release your finger.

Touch and long-hold to bring up a list of all the characters available on that key.
Touch the character you want to enter from the list.
Numbers & Symbol Mode
In Number & Symbol mode, you can enter numbers and symbols from the onscreen keyboard
by sliding your finger. While in this mode, the text mode key displays
To enter numbers and symbols in Swype mode:
1. Select the Number & Symbol mode by touching
2. Enter numbers or symbols using the keyboard.

If you make a mistake, touch
to erase an entire word.

Touch the key for the number or symbol you want to enter.

Touch and hold to enter the number or symbol located at the upper right corner of
the key. Confirm the number or symbol you want to enter is displayed and release
your finger.

Touch and long-hold to bring up a list of all the characters available on that key.
Touch the character you want to enter from the list.
Tip: Touch to show the keyboard with the symbol characters located at the upper right
corner of the key.
Device Basics
to erase a single character. Touch and hold
.
to erase a single character. Touch and hold
22
.