Advertisement
(Figure 5)
2. Handling, Storage, and Transport Environments
1) Operating temperature: 10.0 -36.0
2）Measuring range: 32.0 -43.0
3) Temperatures for storage and transport: -20.0℃- 60.0
4）For indoor use only
3. Battery Specifications and Life
Battery: 2xAAA batteries
Installation: Slide the battery cover off, insert the new battery with the positive
(+) and negative (-) symbols facing the "+" and "-" symbols on the unit.
If you will not be using the thermometer for 15 days or longer, please remove
the battery.
The battery can be used for more than 5,000 times' measurement, and can
stand by for more than one year.
4. Gentle Care and Important information
1) To Clean and Store
⊙
Probe is waterproof design, user can clean the probe with wet cotton swab.
dirt on the main unit with a dry cloth; never put unit body into any liquid.
⊙
Avoid store the unit under bad environment temperature, such as store the unit in the
car which under direct sunshine.
⊙
Protect the thermometer severe impact and shock. Do not touch the probe lens with
fingers. Do not attempt to disassemble the unit, except to replace the battery.
2) Measuring Notes
⊙
This product is designed to avoid probe lens cover. No need to use probe lens cover.
⊙
Clean the probe tip before and after each use. Avoid the accumulation of sweat and
cerumen (earwax) affecting the infrared measurements.
⊙
Do not measure temperature within 30 minutes after eating, exercise, or bathing.
⊙
It's better to wait at least 1 minute between successive readings. If user taking
temperature continuous in a short time, temperature errors are normal. In this event,
please take the average.
⊙
Body temperature is no absolute standard value. Please try to record personal body
temperature measurement in daily life as a reference.
⊙
After turn on the unit or in the process of operation, if the screen displays unreadable
code, please remove the batteries and re-insert them. Then switch on again to continue
measurement.
℃
℃
℃
℃
℃ ＜85%RH
•
(Figure 4)
Wipe off
Advertisement
