Advertisement
8. Press the Coffee Making Button after the Water Temperature Indicator
Lamp stops blinking.
It will take two or three seconds for coffee to start coming out.
9. Adjust the Coffee Outlet according to the height of the coffee cups.
10. Check the Dreg Dump Container.
Please empty it when 12 cups of coffee have been made.
Procedure to Froth Milk
1. Turn on the Power and wait until the Water Temperature Indicator Lamp
stops blinking. Then press the Hot Water or Steam Choice Button and wait
until the Steam Indicator Lamp stops blinking.
2. Choose fresh milk and stainless steel cup for milk frothing.
While frothing, put the nozzle of the Milk Frother half a centimeter into the
water / milk level.
3. Slowly turn the Steam Knob.
Note: The steam will spout out during this operation. Please be careful to avoid
scalding.
4. After frothing is complete, turn back the Steam Knob and press the Hot Water
& Steam Choice Button to return to the state of hot water.
Note: Both of the Water Temperature Indicator Lamp and Steam Indicator Lamp
will blink together again, this means the temperature inside is too high to
make good coffee. Please rotate the Hot Water & Steam Knob again to
release some water until the blinking stops. Then you can make coffee again.
8
Advertisement
