Advertisement
Introduction to Functions
1. It takes two minutes to pre-heat the water in the machine.
2. With power on, the Power Indicator Lamp (16) and the Logo Indicator Lamp (11)
will light up simultaneously.
3. The Water Temperature Indicator Lamp blinking (18) indicates the heating of water.
If the Water Temperature Indicator Lamp (18) is fully ON, it is ready to make
coffee.
4. The Steam Indicator Lamp blinking (20) indicates heating of water for steam. If
the Steam Indicator Lamp (20) is fully ON, steam temperature has reached the
required value.
5. Press Hot Water or Steam Choice Button (19) to choose hot water or steam.
After finishing the process of steaming, press the button again to return to the hot
water state.
6. Use Water Outlet Adjusting Knob (22) to adjust the dripping volume of coffee from
40-180ml/cup.
7. Use Coffee Powder Fineness Adjusting Knob (23) to adjust the degree of fineness
of the powder. This adjustment can only be carried out when the machine is
working.
8. Use Coffee Powder Volume Adjusting Knob (23) to adjust the volume of coffee
powder.
6
Advertisement
