Advertisement
II Operation Guide
1. Charge
The battery is a built-in lithium rechargeable battery, so before you use it the first time, please
fully charge the battery first. The method for charging is as follows:
Computer Connection: use USB cable to connect the glasses to the computer. The glasses will
charge.
Notice: when battery power is too low, the glasses will go into non-operational protection mode,
so they cannot be turned on. Please recharge the battery when this occurs.
2. Power on to video
Please confirm the memory card has already been inserted!
Press the "POWER" button and the blue indicator light will illuminate, showing the glasses are in
standby mode. Hold down the "VIDEO/CAMERA" button and the blue indicator light will start
flashing slowly. This means the glasses are making a video. Press " VIDEO/CAMERA" button
again and the blue indicator light will show steady. During this time, the glasses will be saving the
video. If you need to continue filming video, please hold the "VIDEO/CAMERA" button again.
Video file resolution for: 720 * 480, frames for 29 ~ 30fps/S.
Notice:
a.
Please make sure microSD card has been inserted, if not, it will be power off automatically
after 15 seconds.
The maximum capacity of microSD card that unit can use is 32GB.
b.
c.
Saving files takes time, so please don't press Operation button continuously. This will avoid
saving problems, therefore avoiding the generating of incomplete files.
d.
When you make a video, please focus on the object and keep a least 50cm distance from it
under sufficient illumination. The video will then appear natural, clear and stable.
3. Take Photo
Press "POWER" button, the blue indicator light will illuminate showing the glasses are in standby
mode. Press "VIDEO/CAMERA" button quickly, and the blue indicator light will flash once,
representing a photo shoot. Press again to take another photo.
Pictures resolution:1280*1024
Advertisement
