System Settings; Adjusting The Output Signal (Output Setting) - Boss Dr. Rhythm DR-880 Owner's Manual

System settings

Adjusting the output signal
(Output Setting)
Here you can make final settings before the
signal is sent from MASTER OUT.
1. Press [OUTPUT SETTING].
The Output Setting screen appears.
fig.07-030d
2. Use [CURSOR]
desired screen.
3. Move the cursor to the parameter you
want to edit, and use the VALUE dial to
specify the value.
■ MASTER
fig.07-030d
Parameter/
Range
Output Sel
GUITAR AMP, Specify the device connected to the
LINE/PHONES MASTER OUT jacks
GUITAR AMP:
Choose this if a guitar amp is connected
LINE/PHONES:
Choose this if an audio system or recorder is connected,
or if you're listening through headphones connected to
the PHONES jack
D. Out Lev
Adjust the level of the digital audio
0–200% signal sent from the DIGITAL OUT
jack
Low EQ
-20–+ 20 dB Low range boost/cut amount
/ to select the
Explanation
Parameter/
Range
High EQ
-20–+ 20 dB High range boost/cut amount
Ambience
0–200% Ambience volume
■ GUITAR
fig.07-050d
Parameter/
Range
Out Assign
MASTER,
Specify the jack(s) from which the
IND. A+B
sound from the GUITAR/BASS IN-
PUT jack will be output
IND. A, IND. B
MASTER:
Output from MASTER OUT
IND. A+B:
Output from INDIVIDUAL A/B
IND. A:
Output from INDIVIDUAL A
IND. B:
Output from INDIVIDUAL B
* If you select IND. A+B, IND. A, or IND.B, the following
parameter is displayed.
Parameter/
Range
Output Sel
GUITAR AMP, Specify the device connected to the
LINE/PHONES INDIVIDUAL A/B jacks
GUITAR AMP:
Choose this if a guitar amp is connected
LINE/PHONES:
Choose this if an audio system or recorder is connected,
or if you're listening through headphones connected to
the PHONES jack
4. When you've made the setting, press [EXIT].
The message "Now writing..." will appear,
and the currently setting will be saved.
Explanation
Explanation
Explanation
119