Roland DUO-CAPTURE Owner's Manual page 13

If the "Authenticate" or "Installer requires that you type your password" dialog box appears
during the installation, enter an administrator password and click [OK].
5. When "Welcome to the DUO-CAPTURE Driver installer" appears, click [Continue] .
6. If the screen for selecting the installation destination appears, select the startup
disk and click [Continue] .
7. When the installation type appears, click [Install] or [Upgrade] .
8. Click [Continue Installation] in the next screen .
9. When the installation has finished, click [Restart] to restart the computer .
It may take some time for the computer to restart.
10. After the computer restarts, connect the
DUO-CAPTURE to the computer using a USB cable .
* Turn down the volume on any peripheral devices before
connecting the USB cable .
11. Open "System Preferences" and click [Sound] .
12. Click the [Output] tab and select [DUO-CAPTURE
44 .1kHz] .
"44.1kHz" is displayed after the product name when the
sample rate switch on the DUO-CAPTURE is set to "44.1kHz. "
13. When you have finished making these settings,
quit "System Preferences . "
If you cannot select the DUO-CAPTURE, refer to "Using the DUO-CAPTURE" (p. 18).
If the DUO-CAPTURE is selected as the output device, the computer's audio alerts will be
played using the DUO-CAPTURE; they will not be heard from the computer's speakers.
Mac OS X
Driver Installation
Proceed to p. 14
13