Table of Contents
Advertisement
CAUTION
Avoid climbing on top of the unit, or placing
heavy objects on it
Never climb on top of, nor place heavy
objects on the unit.
IMPORTANT NOTES
Placement
• Do not expose the unit to direct sunlight, place
it near devices that radiate heat, leave it inside
an enclosed vehicle, or otherwise subject it to
temperature extremes. Excessive heat can deform or
discolor the unit.
• When moved from one location to another where the
temperature and/or humidity is very different, water
droplets (condensation) may form inside the unit.
Damage or malfunction may result if you attempt to
use the unit in this condition. Therefore, before using
the unit, you must allow it to stand for several hours,
until the condensation has completely evaporated.
• Do not allow rubber, vinyl, or similar materials to
remain on this unit for long periods of time. Such
objects can discolor or otherwise harmfully affect
the finish.
Maintenance
• For everyday cleaning wipe the unit with a soft,
dry cloth or one that has been slightly dampened
with water. To remove stubborn dirt, use a cloth
impregnated with a mild, non-abrasive detergent.
Afterwards, be sure to wipe the unit thoroughly with
a soft, dry cloth.
• Never use benzine, thinners, alcohol or solvents of
any kind, to avoid the possibility of discoloration
and/or deformation.
Copyright © 2013 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of
ROLAND CORPORATION.
Roland, V-Drums, and OCTAPAD are either registered trademarks or trademarks of Roland Corporation in the United
States and/or other countries.
CAUTION
Keep small items out of the reach of children
To prevent accidental ingestion of the
parts listed below, always keep them out of
the reach of small children.
• Included Parts
Bolts, Spacers (p. 4)
Additional Precautions
• Use a reasonable amount of care when using
its output jack. Rough handling can lead to
malfunctions.
• When disconnecting all cables, grasp the connector
itself—never pull on the cable. This way you will
avoid causing shorts, or damage to the cable's
internal elements.
• This instrument is designed to minimize the
extraneous sounds produced when it's played.
However, since sound vibrations can be transmitted
through floors and walls to a greater degree than
expected, take care not to allow these sounds to
become a nuisance others nearby.
• The rubber portion of the striking surface is treated
with a preservative to maintain its performance.
With the passage of time, this preservative may
appear on the surface as a white stain, or reveal how
the pads were struck during product testing. This
does not affect the performance or functionality
of the product, and you may continue using it with
confidence.
• Continuous playing may cause dis-coloration of the
pad, but this will not affect the Pad's function.
IMPORTANT NOTES
3
Advertisement
Table of Contents
