Rockford Fosgate Platinum RFX8240 Installation & Operation Manual
Rockford Fosgate Platinum RFX8240 Installation & Operation Manual

Rockford Fosgate Platinum RFX8240 Installation & Operation Manual

Platinum series

Advertisement

RFX8240
RFX8250
Source Units
Installation &
Operation

Advertisement

Table of Contents
loading

Summary of Contents for Rockford Fosgate Platinum RFX8240

  • Page 1 RFX8240 RFX8250 Installation & Operation Source Units...
  • Page 2: Table Of Contents

    If, after reading your manual, you still have questions regarding this product, we recommend that you see your Rockford Fosgate dealer. If you need further assistance, you can call us direct at 1-800- 669-9899. Be sure to have your serial number, model number and date of purchase available when you call.
  • Page 3: Safety Instructions

    Installation Section of this manual. Other information can be located by using the Table of Contents. We, at Rockford Fosgate, have worked very hard to make sure all the information in this manual is current. But, as we are constantly finding new ways to improve our product, this information is subject to change without notice.
  • Page 4: Contents Of Carton

    RECAUTIONS Handling the Detachable Faceplate DO NOT drop or cause shock to the faceplate as serious damage may occur. Protect the faceplate by storing it in the supplied carrying case. Avoid Mechanical Malfunction DO NOT grab a disc while it is being automatically loaded into the source unit. Doing this may cause serious damage to the playback mechanism and/or damage to the disc.
  • Page 5: Installation

    NSTALLATION INSTALLATION CONSIDERATIONS The following is a list of tools needed for installation: Volt/Ohm Meter Hand held drill w/assorted bits Wire strippers 1/8" diameter heatshrink tubing Wire crimpers Assorted connectors Wire cutters Soldering iron #2 Phillips screwdriver Solder Battery post wrench Heat gun This section focuses on some of the vehicle considerations for installing your new Source Unit.
  • Page 6: Wiring The System

    WIRING THE SYSTEM CAUTION: If you do not feel comfortable with wiring your new source unit, please see your local Authorized Rockford Fosgate Dealer for installation. CAUTION: Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.
  • Page 7: Iso-Din Mount

    NSTALLATION 5. Connect the LT. BLUE (REMO A 500mA MAX) wire to the “Remote Turn-On” leads of the amplifier(s). This will turn-on the external amplifiers when the source unit is powered on. 6. Connect the DK. BLUE (P. ANT 500mA MAX) wire to the “Power Antenna” lead. This will raise a fully automatic antenna when the source unit is powered on, but only when the unit is in Tuner Mode.
  • Page 8: Source Unit Features

    CAUTION: Do not press the Reset Button too hard or you may cause damage that may void your warranty. If you need assistance, please consult an Authorized Rockford Fosgate Dealer. 1. Insert a paper clip or other slender object into the Reset Button hole in the lower left area of...
  • Page 9: Operation-Basic

    – B PERATION ASIC POWER ON/OFF 1. Press the POWER button to turn the source unit on. 2. Press and hold the POWER button to turn the source unit off. NOTE: After a CD has been played and ejected, press the POWER button once to return to TUNER mode.
  • Page 10: Clock Operation

    – B PERATION ASIC CLOCK OPERATION NOTE: To set the clock, the source unit must be turned OFF. Setting the Clock Hours 1. Press and hold the CLK/A. MEM button until the source unit turns on, the hour will be flashing. 2.
  • Page 11: Operation-Cd Player

    – T PERATION UNER SELECTING A STATION Press the (up) or (down) button once and the Tuner will rapidly proceed to the next (up) or pervious (down) station the tuner can receive. Press and holding either the (up) or (down) button for 2 seconds will put you into TUNER MANUAL mode.
  • Page 12: Advanced Operation

    – CD P PERATION LAYER Advanced Operation To switch to TUNER mode while a CD is playing, press the Power/Tuner Mode button. To return to playing the CD press the CD (Play/Pause) button. Track Selection 1. Press the (up) button to select the next track on the disc. 2.
  • Page 13: Troubleshooting

    Check wiring and repair as necessary Fuse is blown. Replace fuse with same amperage and rating. If this reoccurs, consult your local Authorized Rockford Fosgate Dealer Antenna is disconnected Check connections and repair as necessary Tuner fails to tune any radio stations...
  • Page 14: Specifications

    PECIFICATIONS General 8240 8250 Operating Voltage +10.8V – +16.0V DC +10.8V – +16.0V DC Standby Current 5mA Max 5mA Max Operating Temperature Receiver: -30˚C to +70˚C Receiver: -30˚C to +70˚C CD Player: -10˚C to +65˚C CD Player: -10˚C to +65˚C Preamp Output Voltage >2.0V RMS @ 0.5% THD 5V RMS @ 0.5% THD...
  • Page 15: Warranty Information

    This warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate Dealer in the United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of purchase.
  • Page 16 Rockford Fosgate Rockford Corporation 546 South Rockford Drive Tempe, Arizona 85281 U.S.A. In U.S.A., (480) 967-3565 In Europe, Fax (49) 8503-934014 In Japan, Fax (81) 559-79-1265 www.rockfordfosgate.com 08/02 B.M. Printed in U.S.A. MAN-4223-A...

This manual is also suitable for:

Platinum rfx8250Platinum seriesRfx8240Rfx8250

Table of Contents