Battery Compartment - Roadstar PCD-290 Instruction Manual

Slim portable cd player with lcd display
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
POWER SUPPLY
Use with regular batteries
1.
Open the battery compartment door, located in the disc compartment. (Do not
remove the battery door).
2.
Insert 2 x 1.5V /UM-3/AA size alkaline batteries, following the correct polarity, as indicated
in the battery compartment.
3.
Close the battery compartment door.
Note:
If the symbol "
" flashes in the display, batteries are weak and ought to be replaced.
EARPHONES
Connect the stereo earphones (included) to the Phones jack.
CD PLAYBACK
1.
Connect the Headphones (included) or optional headphones into the Phones
jack. 2. Press the Door Open button to open the CD compartment door.
3.
Insert a disc with the label side facing up.
4.
Close the CD compartment door until a click is heard.
5.
Set the VOLUME control to minimum.
6.
Press
the PLAY/PAUSE ( >II ) button, the unit power will turn on automatically and start
playback.
The total number of tracks and total playing time appear on the display. Playback starts.
During playback, the actual track and the elapsed time appear.
7.
Adjust the VOLUME control to your desired listening level.
8.
To stop playback temporarily, press the PLAY/PAUSE ( >II ) button once. The elapsed
time and track number will flash on the display. Press the PLAY/PAUSE ( >II ) button again
to resume playback.
9.
To stop playback, press the STOP button once.
10. To turn the unit off, press the STOP twice.
Notes:
When the CD door is accidentally opened during playback, "
the
display.
Wait until the disc is fully stopped before pressing the OPEN button.
This unit can play 3" (8cm) single CDs without an adaptor.
English
3
LOCATING A PARTICULAR TRACK OR POINT OF THE TRACK
1.
2.
3.
4.
to search Backwards or forwards, at high speed, a particular point of track.Note: Low
level audio will be heard during the search process to assist in locating the
correct point in the track.
AUTO POWER OFF
When the unit is stopped (standby mode) for approximately 30 seconds, the Auto Power Off
function will activated and turn the unit off automatically.
" will appear on
4
English
Press the - SKIP/SEARCH (
) button once to go back to the beginning of the current
track.
Press the - SKIP/SEARCH (
) button repeatedly to go back to previous tracks.
Press the +SKIP/SEARCH ( ) button repeatedly to go to next tracks.
Press and hold either +SKIP/SEARCH ( ) or - SKIP/SEARCH (

BATTERY COMPARTMENT

) button

Advertisement

Table of Contents
loading

Table of Contents