HP FTAM/9000 Reference Manual page 71

MESSAGE
1011
CAUSE
ACTION
MESSAGE
1015
CAUSE
ACTION
MESSAGE
2008
CAUSE
ACTION
Chapter 3
F_LWR_LAYER_FAIL
A layer below FTAM (e.g., Presentation or Session
layer) caused or reported an error. Usually this
error is indicated by an abort indication; FTAM
returns abort information on this diagnostic after
calling ft_ireceive().
Execute the netfmt utility to obtain log information
and correct the error as described in the log
message. If needed, collect relevant error
information and contact your HP support
representative.
F_ILLEGAL_GRP_SEQ
The grouping sequence is illegal. Depending on the
service_class negotiated, only certain sequences of
PDUs can be in a grouped request.
Call the grouped functions in a valid sequence.
Refer to the HP FTAM/9000 Programmer's Guide
for acceptable sequences when grouping functions.
F_ASSOC_MGT
Association management; returns when an internal
data structure is not present or incorrect.
Ensure the ft_aeactivation() data structures are
present and correctly set. You have two options.
• Terminate the call.
• Reactivate the ftam_init and try to re-establish
the connection.
Diagnostic error_ids
inout_dcb->diagnostic->error_id
71