HP FTAM/9000 Reference Manual page 61

MESSAGE
FTV402_FUNC_UNIT_NEGOTIATED_DOWN
CAUSE The responder does not support all the functional_units
requested on the ft_connect() request.
ACTION Informative message; no action required. Check to see
which functional_units the responder supports. Attempt
the appropriate action using low level calls if the
functional_units supported allow it.
MESSAGE
FTV403_ABORT_BEFORE_CON_CNF_REQ
CAUSE An abort indication returned on a connection before the
responder confirmed the request.
ACTION Check the inout_dcb->diagnostic to determine the
reason for the abort and call the function again.
MESSAGE
FTV404_NEG_CNF_ON_CON_REQ
CAUSE The responder sent a negative confirmation on an
ft_connect() request.
ACTION Check Association Control Service Element (ACSE)
errors and inout_dcb-> diagnostic to determine the
reason for the rejection and call the function again.
MESSAGE
FTV405_HLCF_ABORT_IND_RCVD
CAUSE An abort indication was received on a high level context
free (HLCF) connection.
ACTION Check the inout_dcb->diagnostic to determine the
reason for the abort and call the function again.
Chapter 2
HP vendor_codes
inout_dcb->result.vendor_code
61