RQT-452-RCVR Caution: Changes or modifications not expressly approved by the party responsible for compliance could Ritron Keyfob Transmitters: void the user's authority to operate the equipment. RQT-KEYFOB-1 RQT-KEYFOB-2 RQT-KEYFOB-3 RQT-KEYFOB-4 For assistance, call RITRON at 800-872-1872, or go to www.ritron.com...
Once the radio has been programmed and installed, activate RQT pre-recorded messages by pressing a Ritron model keyfobs can be used to activate the RQT small keyfob transmitter. Ritron model keyfobs are pre- transmitter and broadcast a unique, user recorded voice set to activate 1 of 8 RQT messages.
2. Select the input you would like to program for revision is available at www.ritron.com/tech. Keyfob operation. The input you select will depend on the specific Ritron keyfobs you use. Check to see which model keyfob you have and program the input per the following list.
Holdoff operation considers the keyfob code as it is first twice, wait 30 seconds, then the message is received, but will ignore additional signals from the transmitted twice again. keyfob for the programmed holdoff time. For assistance, call RITRON at 800-872-1872, or go to www.ritron.com...
Changing the Address For convenience, the RQT-433-RCVR keyfob receiver and all Ritron keyfobs come from the factory set to the same address. This establishes a relationship between a single RQT-433-RCVR receiver and multiple keyfobs with different codes. For the vast majority of users the address does not need to be changed.
0-5 VDC Interconnection +V in Ground Valid Decode Out Clock In Antenna Disable In Data Out Current - Standby 5.9 mA Current – w/Antenna Disable 14.1 mA Temperature -30°C to +60°C For assistance, call RITRON at 800-872-1872, or go to www.ritron.com...