Table of Contents
Advertisement
Quick Links
TYPE OF EXHIBIT:
FCC PART:
MANUFACTURER:
MODELS:
TYPE OF UNIT:
FCC ID:
DATE:
Included in this exhibit are draft copies of the User Manual for RITRON Models RQT-152 and RQA-152
VHF-FM Voice Message Transmitters.
These manuals provide the end user with installation and operating instructions.
Signed:
Michael A. Pickard - Project Engineer
INSTALLATION AND OPERATING INSTRUCTION MANUAL
2.1033 (c)(3)
RITRON, INC.
505 West Carmel Drive
Carmel, IN 46032
RQA-152, RQT-152
VHF-FM Voice Message Transmitter
AIERIT32-152
October 20, 2011
RQT-152_UserMan.pdf
Advertisement
Chapters
Table of Contents
Related Manuals for Ritron Quick Talk RQA-152
Summary of Contents for Ritron Quick Talk RQA-152
- Page 1 FCC ID: AIERIT32-152 DATE: October 20, 2011 Included in this exhibit are draft copies of the User Manual for RITRON Models RQT-152 and RQA-152 VHF-FM Voice Message Transmitters. These manuals provide the end user with installation and operating instructions. Signed: Michael A.
- Page 2 Ritron Publication 145000081 Rev. B 10-11 © 2011 Ritron, Inc. All rights reserved. Ritron, Patriot, Jobcom, OutPost, GateGuard, Quiet Call and Quick Assist are registered trademarks of Ritron, Inc. Quick Talk, Liberty and RadioNexus are trademarks of Ritron, Inc. Call 800-USA-1-USA for the right Wireless Solutions to your communication needs.
-
Page 3: Table Of Contents
Note: Before you begin using the above PC programmer, you will also need the following: • A USB to Mini B 5-pin cable. You can purchase this cable from Ritron (pn #60201119) or, since this is a commonly used cable, you may want to check to see if you already own a compatible cable. -
Page 4: About The Quick Talk Tm Wireless
RQT-151M, RQT-152M 154.570 MHz (Blue Dot) wideband • Slow scan battery saver option RQT-151-CANADA 151.055 MHz wideband RQT-152-CANADA RQT-451, RQT-452 467.850 MHz (Silver Star) narrowband RQT-451-CANADA 458.6625 MHz wideband RQT-452-CANADA For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 5: Please Note The Following With
RQT-151, RQT-151M, RQT-451, RQT-451-CANADA, RQT-152, RQT-152M, RQT-452, RQT-452-CANADA • Use only the antenna(s) available from RITRON for these models. DO NOT operate the radio without an antenna. This product generates radio frequency (RF) energy when the •... -
Page 6: Important Safety Information
Call Ritron (800-872-1872): we will be glad to help you. For most applications, this manual should cover everything you will Also, Ritron offers several optional “high gain” antennas. Ritron need to know. -
Page 7: Quick Talk Tm Programmablef
(4) separate inputs that can each be programmed with unique voice messages and attributes. All programming is accomplished with the RITRON RQA/RQT PC Programmer software available at www.ritron.com, and a standard USB Type A to Mini-B cable for interconnection of the PC computer to the Quick Talk ®... -
Page 8: Input Screen
Frequency Table To match other RITRON radios, the owner can select from a table of transmit frequencies. Simply “read-out” the Frequency Code of your RITRON Compand portable, mobile or base radio and enter the same code when programming Some two-way radios have a feature referred to the Quick TalkTM. -
Page 9: Tx Alert Tone
Dwell is used. Only if the sensor is activated for a full five minutes will the “car illegally parked” message be transmitted. FIG-4: Example of Terminated Alarm Input Type For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 10: Message Repeat
In this case, the switch opens and the Frequency Table # message ceases when the vehicle is moved. To match other RITRON radios, the owner can select from a When another vehicle arrives, the Quick Talk again transmits table of transmit frequencies. -
Page 11: Qc Or Dqc Code
Wait Time between Transmissions Inputs 1-4 Open/High On change only Power Strobe Time 250 mS Inputs 1-4 Closed/Low On change only Power Alert 1 Hour Append Power Messages Yes Low Battery Message For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 12: Frequencies And Tones
12.5 kHz narrow band channel bandwidth. Many of the Frequency Table Codes programmed in your compatible Ritron radios are for 25 kHz wide band channels. If these codes are selected when programming your Quick Talk radio, the radio will operate at a 12.5 kHz narrow band channel bandwidth. -
Page 13: Quick Talk Tm Transmitter Table
Use Code “44” to program No Tone for systems without a Coded Squelch Interference Eliminator feature. TABLE 7: Digital Quiet Call Codes Code Code Code Code Code Code Code Code Code For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 14: Recording Your Quick Talk Tmv
Power Fail Message on a scheduled basis for as associated with the input selected. long as the +12 VDC external supply is not detected. For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 15: Custom Voice Messages
If Number of Message Transmissions has been programmed for more than one transmission, the Quick Talk transmitter will again be activated and Steps 1 – 8 will be repeated for the programmed number of transmissions. For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 16: I Q T
AWG cable with an outside diameter of 0.25” for a SMB Antenna Connector watertight fit. This connects the front-panel, BNC antenna connector to If you cannot find suitable wire, call Ritron at 800-872- the radio’s printed circuit board. 1872. External Audio Input... -
Page 17: Installing The Quick Talk Tm
“Door three details. closed” for the switch open condition. Note that magnetic reed switches are available which work in the opposite way. For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 18: Optional Installation Instructions
Power Fail message. maximum resolution, and is the recommended value. Use Ritron #RPS-203 Power Supply (12-15 VDC, 200 mA), or Using a lower resistance value with the 4-20 mA current equivalent, to power the Quick Talk . -
Page 19: Itron Nc Imited Arranty
Attention: Warranty Department. Please point out the nature of the defect in as much detail as you can. You must retain your sales or lease receipt (or other written evidence of the date of purchase) and deliver it along with the product. If RITRON chooses to repair or replace a defective product, RITRON may replace the product or any part or component with reconditioned product, parts or components. - Page 20 Ritron Publication 14500079 Rev. B 10-11 ® © 2011 Ritron, Inc. All rights reserved. Ritron, Patriot, Jobcom, OutPost, GateGuard, Quiet Call and Quick Assist are registered trademarks of Ritron, Inc. Quick Talk, Liberty and RadioNexus are trademarks of Ritron, Inc.
-
Page 21: About The Quick Assist
• A USB to Mini B 5-pin cable. You can purchase this cable - Transmit Frequency; from Ritron (pn #60201119) or, since this is a commonly ® - Tone Coded Squelch Encoder (Quiet Call used cable, you may want to check to see if you already own - Digital Coded Squelch Encoder (Digital Quiet CaII a compatible cable. -
Page 22: Please Note The Following With Regard To Rf Exposure For This Product
RQA-151, RQA-151M, RQA-451, RQA-451-CANADA, RQA-152, RQA-152M, RQA-452, RQA-452-CANADA • Use only the antenna(s) available from RITRON for these models. DO NOT operate the radio without an antenna. This product generates radio frequency (RF) energy when the •... -
Page 23: Frequently Asked Questions About Quick Assist Programming
F.C.C. Station License. Consult your radio user manual, coded squelch signals required for your radio system. your dealer, or call Ritron for help if you cannot determine your ® Do I need to test my Quick Assist Transmitter? radio’s receiver frequency. -
Page 24: Summary Screen
ROGRAMMABLE EATURES ® The Quick Assist can be programmed with unique voice messages and attributes. All programming is accomplished with the RITRON RQA/RQT PC Programmer software available at www.ritron.com. ® The programmer software requires Window XP or greater, and a PC computer with a USB port. -
Page 25: Qc Or Dqc Code
Message Repeat To identify your QC or DQC tone: Number of Message Transmissions • Read-out the Tone Code of the RITRON radio you intend to You can set a limit to the number of times the message will be ®... -
Page 26: Power Options Screen
FIG-5: Programmer Power Options Screen Message Repeat Frequency Table # Time between transmissions To match other RITRON radios, the owner can select from a ® This sets the amount of time the Quick Assist will wait before table of transmit frequencies. Simply “read-out” the Frequency re-transmitting a Low Battery Alert message. -
Page 27: Programming Your Quick Assist Transmitter Frequency And Tone
The Quick Assist transmitter operates exclusively on a 12.5 kHz narrow band channel bandwidth. Many of the Frequency Table Codes programmed in your compatible Ritron radios are for 25 kHz wide band channels. If these codes are selected when ®... - Page 28 Use Code “44” to program No Tone for systems without a Coded Squelch Interference Eliminator feature. TABLE 6: Digital Quiet Call Codes Code Code Code Code Code Code Code Code Code ________________________________________________________________________________________________ For assistance, call RITRON at 800-872-1872, or go to www.ritron.com...
-
Page 29: Recording Your Quick Assist Voice Messages
However, when a user hears a custom message such as selected. ‘Assistance needed in the paint department”, the meaning is clear. ________________________________________________________________________________________________ For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 30: Rogramming
Secure the case halves with the four corner screws and re-install on the wall or mounting surface. NOTE: Be sure to properly dispose of the used batteries removed from ® the Quick Assist ________________________________________________________________________________________________ For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 31: Automatic Low Battery Alert Message
Estimated Battery Life: Starting with a fresh set of AA alkaline batteries, Quick Assist can transmit about 7,000 voice messages over a period of one year before the batteries will need to be replaced. ________________________________________________________________________________________________ For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 32: Identification Of Quick Assist Controls And Connectors
® further disassemble the Quick Assist unit; doing so risks Microphone damage to the unit and voiding the manufacturer’s Microphone for recording voice messages. warranty. FIG-1: CONTROLS & CONNECTIONS ________________________________________________________________________________________________ For assistance, call RITRON at 800-872-1872, or go to www.ritron.com... -
Page 33: Ritron, Inc. Limited Warranty
Attention: Warranty Department. Please point out the nature of the defect in as much detail as you can. You must retain your sales or lease receipt (or other written evidence of the date of purchase) and deliver it along with the product. If RITRON chooses to repair or replace a defective product, RITRON may replace the product or any part or component with reconditioned product, parts or components.
Need help?
Do you have a question about the Quick Talk RQA-152 and is the answer not in the manual?
Questions and answers