Closing A Job - RIDGID SeeSnake CS1000 Operator's Manual

1
2
3
4
5
Expanded Customer Report Preview
Figure 42 –
24 - English
TM

Closing a Job

After completing the inspection and after adding images,
text comments, and video clips close the job by pressing the
Job Manager Key
press the Select Key
will be saved in a report.
Figure 43 – Closing a Job
Resuming a Closed Job
You can re-open and modify closed jobs by performing the
following:
Figure 44 – Resume Job from Job Manager
1. Press the Job Manager Key
2. Use the down Arrow Key
3. Use the up and down Arrow Keys
Ridge Tool Company
and then, with "Close Job" highlighted,
. The data associated with the job
Job" and press the Select Key
the job you want to resume. When the blue outline is
around the "Resume Job" icon
to resume press the Select Key
to navigate to "Resume
.
to navigate to
of the job you want
.