RIDGID DP15501 Operator's Manual page 26

ADJUSTMENTS
TO ADJUST THE BELT LATCH GUARD
See Figure 29.
The button latch is adjusted at the factory to be self latching
when the pulley guard lid is closed.
If adjustment is needed.
n Loosen the two screws securing the latch to the lid and
move latch back until the lid closes without depressing
the button.
n The button can also be adjusted up and down to assure
lid closes tight by loosening the two screws in back of
the latch button, and moving the button up or down as
needed.
BUTTON
LATCH
SCREW
SPINDLE
PULLEY
SET
SCREW
HEX
NUT
26
SCREW
MOTOR
PULLEY
Fig. 29