Table of Contents
Advertisement
103
Internet connections
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (*.p12) to your phone before you can
connect to a Wi-Fi network with EAP-TLS authentication protocol.
1. Save the certificate file to the root folder of the storage card.
2. From the Home screen, press MENU, and then tap Settings > Security.
3. Tap Install from SD card.
4. Select the network certificate needed to connect to the EAP-TLS network.
5. Follow the steps in
page 102 to connect to the Wi-Fi network.
Checking the wireless network status
1. From the Home screen, press MENU, and then tap Settings > Wireless &
networks.
2. On the Wireless & networks screen, tap Wi-Fi settings, and then tap the wireless
network that the phone is currently connected to.
A message box is then displayed showing the Wi-Fi network name, status, speed,
signal strength, and more.
If you want to remove the settings for this network from your phone, tap Forget. If
you want to reconnect to a wireless network that you have removed, you'll need to
choose the wireless network from the list of available Wi-Fi networks again. If it is a
secured wireless network, you'll need to enter the wireless network credentials
again.
Connecting to another Wi-Fi network
1. From the Home screen, press MENU, and then tap Settings > Wireless &
networks.
2. Tap Wi-Fi settings. Detected Wi-Fi networks are displayed in the Wi-Fi
networks section.
3. To manually scan for available Wi-Fi networks, on the Wi-Fi screen, press MENU,
and then tap Scan.
4. Tap another Wi-Fi network to connect to it.
Turning Wi-Fi on and connecting to a wireless network
on
Advertisement
Table of Contents
