Technical Data; Symbols; Functional Description; Use For Intended Purpose - Festool OF 2200 EB Instruction Manual

8
TO REDUCE THE RISK OF
INJURY, USER MUST READ AND UNDER-
STAND INSTRUCTION MANUAL.

Technical data

Power
Voltage
No load speed
Quick height adjustment
Fine height adjustment
Router diameter, max.
Drive shaft connection
of the spindle
Weight
Protection class

Symbols

V Volts
A Amperes
Hz Hertz
~ Alternating current
n No load speed
0
Class II Construction
rpm Revolutions or reciprocation per
minute
Ø Diameter
Warning of general danger
Read the Operating Instructions/
Notes!
Advice or tip

Functional description

The pictures for the functional description
are on a fold-out page at the beginning of
the instruction manual. When reading of the
manual you can fold out this page for having
always an overview of the machine.
1.1 Adjusting wheel for fi ne routing
depth adjustment
1.2 Dial ring for fi ne routing depth ad-
justment
1.3 Rotary knob for fi xing routing depth
1.4 Scale for routing depth
1.5 Depth stop with indicator
1.6 Clamp lever for depth stop
15 A
~ 120 V, 60 Hz
10000 - 22000 rpm
80 mm (3.1")
20 mm (0.8")
89 mm (3.5")
M 22x1
7.8 kg (17.2 lbs)
/ II
1.7 Eccenter for connecting depth stop
and stepped stop
1.8 Stepped stop
1.9 Lever for changing base runner
1.10 Rocker switch for spindle lock
1.11 Adjusting wheel for speed control
2.1 Locking knob for on/off switch
2.2 On/off switch
2.3 Lever for locking protective guard
2.4 Handles
2.5 Extractor connector

Use for intended purpose

The routers are designed for routing wood,
plastics and similar materials. Aluminium and
plasterboard can also be processed with cor-
responding cutters such as are listed in the
Festool catalogues.
The user is liable for damag-
es and injuries due to incorrect usage.

Electrical connection

The network voltage must conform to the
voltage indicated on the rating plate. A 16 A
safety fuse (for 120 V) or a corresponding
protective circuit-breaker is required.
Extension cable
If an extension cable is required, it must have
a suffi cient cross-section so as to prevent an
excessive drop in voltage or overheating. An
excessive drop in voltage reduces the output
and can lead to failure of the motor. The table
below shows you the correct cable diameter as
a function of the cable length for the router OF
2200 EB. Use only U.L. and CSA listed exten-
sion cables. Never use two extension cables
together. Instead, use one long one.
Total Extension Cord
Lenght (feed)
Cord size (AWG)
Note:
The lower the AWG number, the stronger the
cable.
25 50 100 150
16 14 12 10