Engine Oil Change - Honda Marine BF8D Owner's Manual

SERVICING YOUR OUTBOARD MOTOR

Engine Oil Change

An engine oil evacuation device may
be used to remove the engine oil.
Drain the used oil while the engine is
warm. Warm oil drains quickly and
completely.
1. Unlatch and remove the engine
cover (p. 74 ).
76
ENGINE OIL DRAIN SCREW
2. Remove the oil filler cap, and
place a suitable container below
the drain screw hole to catch the
used oil, then remove the engine
oil drain screw.
3. Allow the used oil to drain
completely, then reinstall the
engine oil drain screw, and tighten
it securely.
Inspect the sealing O-ring and
replace if damaged or torn.
Improper disposal of engine oil
can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a trash bin, dump
it on the ground, or pour it down a
drain.
4. With the outboard motor in a
vertical position, fill to the upper
limit mark on the dipstick (p.
with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
1.1 US qt (1.0 L)
With oil filter change:
1.2 US qt (1.1 L)
5. Install the oil filler cap and tighten
it securely.
6. Install and lock the engine cover.
75 )