Engine Oil Recommendations - Honda Marine BF2D Owner's Manual

SERVICING YOUR OUTBOARD MOTOR
OIL FILLER CAP
OIL FILLER HOLE
5. Stand the outboard motor in a
vertical position, and install a new
washer and the oil drain screw
securely.
6. Remove the engine cover.
44
Improper disposal of engine oil
can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a trash bin, dump
it on the ground, or pour it down a
drain.
7. Remove the oil filler cap and fill
the crankcase with the
recommended oil up to the upper
limit mark on the oil level
inspection window.
Engine oil refill capacity:
0.26 US qt (0.25 L)
8. Install the oil filler cap and tighten
it securely.
9. Install the engine cover.
10. Install the outboard on the boat.

Engine Oil Recommendations

Oil is a major factor affecting
performance and service life. Use
4-stroke detergent oil.
AMBIENT TEMPERATURE
TM
Honda 10W-30 FC-W outboard
motor oil is recommended for
general use.
If Honda 10W-30 FC-W oil is not
available, Honda recommends that
you use API service category SG, SH
or SJ oil. The SAE oil viscosity and
service category are in the API label
on the oil container.