Maintenance - HoMedics ParaSpaMini PAR-100C Instruction Manual And Warranty

3. Repeat this step several times until several layers have formed, 6-10
coatings are suggested. If paraffin wax temperature is too hot or too
cold, adjust the temperature accordingly. Turn the dial
clockwise(right) to increase the paraffin wax temperature or counter-
clockwise(left) to reduce the paraffin wax temperature.
4. For longer heat treatment, place a plastic liner (provided) over the
treated area and twist bag at opening. Keep paraffin wax and liner
on treated area for 10-20 minutes for ultimate therapy. See Fig. 4
NOTE: When using the paraffin bath with plastic liners on your
feet, do not walk around! This may cause you to slip and fall.
5. Peel off the wax from the treated area. If using a plastic liner, peel
the plastic lining from the area being treated. Paraffin wax will peel
off with liner. See Fig. 5
6. Discard used wax.
NOTE: If you are the only person using the ParaSpa Mini, the wax
can be re-used, simply put it back into the tub to re-melt.

Maintenance:

Periodically, the used portion of paraffin wax should be replaced and
the unit should be cleaned.
1. Unplug unit and remove grate. Allow paraffin wax to
solidify overnight.
2. Push on one end of paraffin wax block. This will tip it up. Lift the
block out of the unit and dispose of it. DO NOT USE SHARP
OBJECTS TO REMOVE THE PARAFFIN WAX BLOCK, THIS MAY
SCRATCH OR DAMAGE THE TUB. If the paraffin wax does not
remove easily, plug unit in and allow to heat for 10–15 minutes
then remove the paraffin wax block and unplug the unit.
3. Wipe the inside of the unit with a disposable towel to remove
residual dirt and paraffin.
4. With a damp, soapy cloth, wipe clean. DO NOT POUR WATER
INTO THE UNIT, OR IMMERSE THE UNIT IN WATER.
5. Store in a cool, dry place. When you are ready to re-use the
ParaSpa Mini paraffin bath for the next heat treatment, repeat steps
2-7, "How to set up the ParaSpa Mini unit". Then, follow steps 1-6,
"How to use the paraffin treatment".
Caution:
This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, the
plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician.
6
Para SpaMini
Grate
Red LED Indicator
Indicates the heating
element is on
Tub
3-1lb. Bags of Paraffin Wax
P A R A F F I N B A T H
™
Green LED Indicator
Indicates unit is plugged
in and power is on
Lid
MIN./MAX.
Levels
Variable Heat Control