Honda Accord Crosstour Owner's Manual page 354

Replacing a Fog Light Bulb
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen light bulbs get very hot when
lit. Oil, perspiration, or a scratch on
the glass can cause the bulb to overheat
and shatter.
The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustment should be done by your
dealer or another qualified
technician.
UNDER COVER
HOLDING CLIPS
Passenger's side
1. Remove the three holding clips
with a flat-tip screwdriver.
Pull down the under cover from
the bumper carefully.
2011 Accord Crosstour
BULB
ELECTRICAL
CONNECTOR TAB
2. Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
3. Remove the bulb by turning it
about one-quarter turn
counterclockwise.
Lights
CONTINUED
351