TAB
ELECTRICAL CONNECTOR
2.
Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
3.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
4.
Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
5.
Push the electrical connector onto
the bulb.
BULB
2011 Accord Crosstour
6.
Turn on the headlights to test the
new bulb.
Passenger's side
Reinstall the engine coolant
reserve tank.
Lights
CONTINUED
345