Honda Accord Crosstour Owner's Manual page 250

Compass Zone Selection
In most areas, there is a variation
between magnetic north and true
north. Zone selection is required so
the compass can compensate for this
variation. To check and select the
zone, do this:
1. Turn the ignition switch to the ON
(II) position.
2. Press and hold the MENU button
for about 5 seconds until you hear
a beep. The display shows you the
compass setting menu items.
3. Turn the selector knob to select
''ZONE.'' Press the selector knob
(ENTER) to enter your selection.
The display shows you the
currently selected zone number.
4. Find the zone for your area on the
map (see page 248 ). If the correct
zone is not shown, turn the
selector knob to cycle the zone
lists up or down.
If necessary, press the RETURN
button to return to the previous
display. Pressing the MENU
button will cancel the compass
setting mode.
2011 Accord Crosstour
Compass
ZONE NUMBER
5. Once the correct zone is displayed,
press the selector knob. The
display then returns to normal.
CONTINUED
247