Honda Accord Crosstour Owner's Manual page 350

Replacing a Front Turn Signal/
Parking Light Bulb
STAY
1. Open the hood.
To change the turn signal bulb on
the passenger's side, remove the
engine coolant reserve tank by
pulling it out of its stay.
FASTENER
SPLASH
SEPARATOR
TAB
DUCT
To change a bulb on the driver's side,
remove the fastener with a flat-tip
screwdriver, and remove the splash
separator by pushing the tab. Then
remove the duct.
2011 Accord Crosstour
BULB
SOCKET
2. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
3. To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.
Lights
CONTINUED
347