Table of Contents
Advertisement
CHAPTER 1
INTRODUCTION
1.5 DeviceNet Version Supported
1.5.1 SJ300/L300P Series
SJ-DN2 can be used for the following production number(MFG No) of SJ300/L300P series.
After Manufacturing number : XX8KXXXXXXXXXXXX SJ300-0.4-55kW / L300P-11-75kW supported
XXEMXXXXXXXXXXXX SJ300-75-132kW / L300P-90-132kW supported
(Note) Production number (MFG No) is written in specifications label on main body of SJ300/L300P series.
Refer to figure 1-2, figure 1-3.
(Figure1-2,1-3 are the example of SJ300 series. L300P series are the same manner as SJ300 series.)
Specifications label
Figure 1-2 Position of specifications label
Inverter model
Maximum applicable
motor
Input ratings
Output ratings
Production number
Figure 1-3 Contents of specifications label
1.5.2 SJ700 Series
It is possible to use all the SJ700 Series for SJ-DN2.
1.6 Production specification
Basically, the environmental specification of the SJ-DN2 is in accordance with SJ700/SJ300/L300P series
inverter. Please refer to the instruction manual of SJ700/SJ300/L300P series.
3
Advertisement
Table of Contents
