Accessories And Attachments; Carton Contents - Hitachi B13F Instruction Manual

ACCESSORIES AND ATTACHMENTS

RECOMMENDED ACCESSORIES
WARNING
To avoid injury:
• Use only accessories recommended for this Drill Press.
• Follow instructions that accompany accessories. Use of
improper accessories may cause hazards.
UNPACKING AND CHECKING CONTENTS
Carefully unpack the Drill Press and all its parts, and compare
against the illustration following. Place the saw on a secure
surface and examine it carefully.
WARNING
• To avoid injury from unexpected starting, do not plug
the power cord into a power source receptacle during
unpacking and assembly. This cord must remain
unplugged whenever you are assembling or adjusting
the drill press.
• If any part is missing or damaged, do not plug the drill
press in until the missing or damaged part is replaced,
and assembly is complete.
• To protect the drill press from moisture, a protective
coating has been applied to the machined surfaces.
Remove this coating with a soft cloth moistened with
kerosene or WD-40.
WARNING
To avoid fire or toxic reaction, never use gasoline, naphtha,
acetone, lacquer thinner or similar highly volatile solvents to
clean the drill press.

CARTON CONTENTS

– 7 –
• Use only accessories designed for this Drill Press to
avoid injury from thrown broken parts or workpieces.
• Do not use any accessory unless you have completely
read the instruction or operator's manual for that
accessory.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION
DRILL PRESS:
A. Head Assembly
B. Table
C. Base
D. Column Assembly
E. Feed Handle
F. Crank Handle
G. Batteries
LOOSE PARTS BAG:
H. Hex Bolts
I. Hex Wrench
J. Flat Washers
BOX:
K. Chuck Key
L. Chuck
English
QUANTITY
1
1
1
1
3
1
2
4
1
4
1
1