Table of Contents
Advertisement
1310
1309
1308
1307
1306
1305
1304
1303
1302
REF
PART #
DESCRIPTION
1301
P0750G1301 MODEL NUMBER LABEL
1302
G8588
GRIZZLY NAMEPLATE
1303
P0750G1303 FLUID CAPACITIES LABEL
1304
PLABEL-63C DISCONNECT POWER LABEL
1305
PLABEL-55C ENTANGLEMENT HAZARD LABEL
1306
P0750G1306 GLASSES/FACESHIELD LABEL
1307
PLABEL-12D READ MANUAL LABEL
1308
P0750G1308 FEED & THREAD CHART
1309
P0750G1309 TRAINED OPERATORS NOTICE LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
Model G0750G (Mfg. Since 11/12)
front Machine Labels
1311
G0750G Machine Labels B
(11/19/12)
SPINDLE SPEED
HAZARD!
Using a spindle speed
that is too fast for the
G0750G Machine Labels B
chuck or an installed
workpiece can result
(11/19/12)
in serious impact
injuries or death! Use
IMPACT INJURY
slow spindle speeds
HAZARD!
with large or bulky
Remove chuck key
workpieces. Never
and all adjustment
exceed RPM rating of
tools before starting
SPINDLE SPEED
chuck.
lathe.
HAZARD!
Using a spindle speed
that is too fast for the
chuck or an installed
workpiece can result
Loosen carriage
in serious impact
lock bolt before
injuries or death! Use
IMPACT INJURY
using carriage
slow spindle speeds
HAZARD!
auto-feed.
with large or bulky
Remove chuck key
workpieces. Never
and all adjustment
exceed RPM rating of
tools before starting
chuck.
lathe.
Only trained and properly
supervised personnel are
allowed to operate this
Loosen carriage
machine. If safe operation
lock bolt before
procedures are not clearly
using carriage
understood, request
ONLY move levers while lathe is completely
auto-feed.
additional training from a
stopped. Never force levers when shifting.
supervisor before
beginning operation.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
Only trained and properly
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
supervised personnel are
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
allowed to operate this
machine. If safe operation
procedures are not clearly
understood, request
additional training from a
supervisor before
beginning operation.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
G0750G Machine Labels B
• Label is actual size
• Label must be made of
(11/19/12)
G0750G Machine Labels A
SPINDLE SPEED
HAZARD!
Using a spindle speed
that is too fast for the
chuck or an installed
workpiece can result
in serious impact
IMPACT INJURY
injuries or death! Use
slow spindle speeds
HAZARD!
with large or bulky
Remove chuck key
workpieces. Never
and all adjustment
Specifications
exceed RPM rating of
tools before starting
chuck.
lathe.
Motor: 2 HP, 220V, Single-Phase
Swing Over Bed: 12"
Swing Over Gap: 17"
Swing Over Cross Slide: 7"
Distance Between Centers: 36"
Spindle Type: D1-5 Camlock
Loosen carriage
Spindle Taper: MT#5
lock bolt before
Spindle Bore: 1.575"
Tailstock Taper: MT#3
using carriage
Cross Slide Travel: 5-5/16"
auto-feed.
Compound Travel: 3-1/4"
Weight: 1059 lbs.
Only trained and properly
supervised personnel are
allowed to operate this
machine. If safe operation
procedures are not clearly
understood, request
ONLY move levers while lathe is completely
additional training from a
stopped. Never force levers when shifting.
supervisor before
beginning operation.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
FOR GRIZZLY MACHINES ONLY! All labels created by Grizzly Industrial, Inc. are
copyrighted and must only be used on Grizzly brand machines. Never use Grizzly's label
1312
1313
• Label is actual size
• Label must be made of
oil-resistant material
WARNING!
READ and UNDERSTAND
instruction manual to
avoid serious injury. If a
manual is not available,
DO NOT use machine. Go
to www.grizzly.com or
call (800) 523-4777.
• Label is actual size
• Label must be made of
oil-resistant material
EYE/FACE
INJURY HAZARD!
Always wear safety
WARNING!
glasses and a face
shield when using
G0750G Machine Labels A
READ and UNDERSTAND
this machine.
instruction manual to
avoid serious injury. If a
manual is not available,
(11/19/12)
DO NOT use machine. Go
WARNING!
to www.grizzly.com or
call (800) 523-4777.
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
EYE/FACE
caught in moving parts.
INJURY HAZARD!
Always wear safety
glasses and a face
Specifications
WARNING!
shield when using
this machine.
Motor: 2 HP, 220V, Single-Phase
To reduce the risk of serious injury when using this machine:
DISCONNECT
1. Read and understand entire manual.
Swing Over Bed: 12"
POWER BEFORE
2. Always wear ANSI-approved safety glasses AND face shield.
Swing Over Gap: 17"
3. Avoid getting entangled in rotating spindle or workpiece—tie
ADJUSTMENTS,
WARNING!
Swing Over Cross Slide: 7"
back long hair, roll up sleeves, and DO NOT wear loose
MAINTENANCE, OR
Distance Between Centers: 36"
clothing, gloves, or jewelry.
ENTANGLEMENT
SERVICE.
4. Disconnect power before mounting workpiece, setting up,
HAZARD!
Spindle Type: D1-5 Camlock
adjusting, or servicing.
Tie back long hair, roll up
Spindle Taper: MT#5
5. Make sure workpiece is properly and securely held and has
long sleeves, and remove
Spindle Bore: 1.575"
safe clearance through full rotation before starting lathe.
loose clothing, jewelry, or
Tailstock Taper: MT#3
6. Always use the proper spindle speed for chuck rating and
gloves to prevent getting
workpiece material.
caught in moving parts.
Cross Slide Travel: 5-5/16"
7. When first starting spindle rotation with a new workpiece
Compound Travel: 3-1/4"
setup, use slowest spindle speed and stand to side of spindle
Weight: 1059 lbs.
area until you verify that workpiece safely rotates.
8. Keep all guards and covers in place during operation.
9. Remove chuck key and all adjustment tools before starting.
10. Never touch rotating chuck or workpiece with hands.
11. DO NOT reverse spindle rotation while spindle is in motion.
DISCONNECT
12. Never leave lathe running unattended.
POWER BEFORE
Date
13. Do not operate under influence of drugs or alcohol, or when
ADJUSTMENTS,
excessively tired.
MAINTENANCE, OR
14. Properly support long workpieces with an appropriate rest.
Serial #
SERVICE.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
ONLY move levers while lathe is completely
stopped. Never force levers when shifting.
Fluid Capacities
Component
Capacity
Type
Headstock
3.5 qt.
Grizzly #T23963 or ISO 32 equivalent
Gearbox
1 qt.
Grizzly #T23962 or ISO 68 equivalent
Apron
0.5 qt.
Grizzly #T23962 or ISO 68 equivalent
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! All labels created by Grizzly Industrial, Inc. are
copyrighted and must only be used on Grizzly brand machines. Never use Grizzly's label
artwork on other brands of machines.
oil-resistant material
WARNING!
READ and UNDERSTAND
• Label is actual size
instruction manual to
avoid serious injury. If a
• Label must be made of
manual is not available,
(11/19/12)
DO NOT use machine. Go
oil-resistant material
to www.grizzly.com or
call (800) 523-4777.
EYE/FACE
INJURY HAZARD!
Always wear safety
glasses and a face
shield when using
WARNING!
this machine.
To reduce the risk of serious injury when using this machine:
1. Read and understand entire manual.
2. Always wear ANSI-approved safety glasses AND face shield.
WARNING!
3. Avoid getting entangled in rotating spindle or workpiece—tie
back long hair, roll up sleeves, and DO NOT wear loose
ENTANGLEMENT
clothing, gloves, or jewelry.
HAZARD!
4. Disconnect power before mounting workpiece, setting up,
Tie back long hair, roll up
adjusting, or servicing.
long sleeves, and remove
5. Make sure workpiece is properly and securely held and has
loose clothing, jewelry, or
safe clearance through full rotation before starting lathe.
gloves to prevent getting
6. Always use the proper spindle speed for chuck rating and
caught in moving parts.
workpiece material.
7. When first starting spindle rotation with a new workpiece
setup, use slowest spindle speed and stand to side of spindle
area until you verify that workpiece safely rotates.
8. Keep all guards and covers in place during operation.
9. Remove chuck key and all adjustment tools before starting.
10. Never touch rotating chuck or workpiece with hands.
DISCONNECT
11. DO NOT reverse spindle rotation while spindle is in motion.
POWER BEFORE
12. Never leave lathe running unattended.
Date
ADJUSTMENTS,
13. Do not operate under influence of drugs or alcohol, or when
MAINTENANCE, OR
excessively tired.
Serial #
14. Properly support long workpieces with an appropriate rest.
SERVICE.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Fluid Capacities
Component
Capacity
Type
Headstock
3.5 qt.
Grizzly #T23963 or ISO 32 equivalent
1301
Gearbox
1 qt.
Grizzly #T23962 or ISO 68 equivalent
Apron
0.5 qt.
Grizzly #T23962 or ISO 68 equivalent
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
artwork on other brands of machines.
REF
PART #
1310
P0750G1310 LEVERS NOTICE LABEL
1311
P0750G1311 MACHINE ID LABEL
1312
P0750G1312 IMPACT INJURY HAZARD LABEL
1313
P0750G1313 SPINDLE SPEED HAZARD LABEL
1314
P0750G1314 THREAD DIAL CHART
1315
P0750G1315 CARRIAGE LOCK BOLT NOTICE
1316
PPAINT-11
1317
PPAINT-1
1314
1315
• Label is actual size
• Label must be made of
oil-resistant material
G0750G Machine Labels B
• Label is actual size
• Label must be made of
G0750G Machine Labels B
(11/19/12)
oil-resistant material
WARNING!
1316
READ and UNDERSTAND
instruction manual to
SPINDLE SPEED
avoid serious injury. If a
HAZARD!
manual is not available,
DO NOT use machine. Go
SPINDLE SPEED
Using a spindle speed
to www.grizzly.com or
call (800) 523-4777.
that is too fast for the
chuck or an installed
Using a spindle speed
workpiece can result
that is too fast for the
in serious impact
chuck or an installed
IMPACT INJURY
injuries or death! Use
EYE/FACE
workpiece can result
slow spindle speeds
INJURY HAZARD!
HAZARD!
in serious impact
Always wear safety
with large or bulky
injuries or death! Use
Remove chuck key
glasses and a face
workpieces. Never
and all adjustment
shield when using
slow spindle speeds
exceed RPM rating of
tools before starting
this machine.
with large or bulky
chuck.
lathe.
workpieces. Never
exceed RPM rating of
WARNING!
chuck.
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
Loosen carriage
long sleeves, and remove
lock bolt before
loose clothing, jewelry, or
gloves to prevent getting
using carriage
caught in moving parts.
auto-feed.
DISCONNECT
POWER BEFORE
ADJUSTMENTS,
Only trained and properly
MAINTENANCE, OR
supervised personnel are
SERVICE.
allowed to operate this
Only trained and properly
machine. If safe operation
supervised personnel are
procedures are not clearly
allowed to operate this
understood, request
machine. If safe operation
ONLY move levers while lathe is completely
additional training from a
stopped. Never force levers when shifting.
procedures are not clearly
supervisor before
understood, request
beginning operation.
additional training from a
supervisor before
beginning operation.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
1317
DESCRIPTION
G0750G
PUTTY TOUCH-UP PAINT
GRIZZLY GREEN TOUCH-UP PAINT
• Label is actual siz
• Label must be ma
(11/19/12)
oil-resistant mater
WARNING!
READ and UNDERSTAND
instruction manual to
avoid serious injury. If a
HAZARD!
manual is not available,
DO NOT use machine. G
to www.grizzly.com or
call (800) 523-4777.
IMPACT INJURY
EYE/FACE
INJURY HAZARD!
HAZARD!
Always wear safety
Remove chuck key
glasses and a face
and all adjustment
shield when using
this machine.
tools before starting
lathe.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
Loosen carriage
long sleeves, and remov
lock bolt before
loose clothing, jewelry, o
gloves to prevent getting
using carriage
caught in moving parts.
auto-feed.
DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE, OR
SERVICE.
ONLY move levers while lathe is comple
stopped. Never force levers when shifti
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
-109-
Advertisement
Table of Contents
