Table of Contents
Advertisement
Replay Tool
This tool provides the ability to replay recorded videos. It also provides a search function which
allows you to perform a search based on the start time, end time, IP address, and channel.
Electronic Map
A map gives a visual overview of the cameras in your installation. A map is an image, for example a
drawing or a photograph, on which you place cameras and views. GSurf supports an electronic map
that lets you identify the locations of your cameras and the status of their alarms.
Add an Electronic Map
1. Right click on the Electronic Map Browser; click on the Add a map on the popup menu.
2. Choose an image. The map will be displayed in the electronic map field.
NOTE:
The supported image files are: bmp, jpg or gif. GSurf will display the electronic map in full
resolution, and the user can use the scroll bars to view the whole image.
Add a device to the electronic map
1. Open Device Browser panel and electronic map field.
2. On Device Browser panel, click on the
channel, drag it and drop it to the preferred
destination on the map.
3. An icon
the channel number will now be shown on
the map. Right click on the icon to change
the icon settings.
NOTE:
When GSurf receives an alarm report and
the alarm action is set to Display Warning in Electronic Map, the corresponding icon on the map
will flash red
.
Lock the map
To avoid changing the positions of cameras on the map accidently, the users can lock the map after
adding all devices. Right on the map, in the popup menu, enable Lock the map.
Firmware 1.0.0.17
Grandstream Networks, Inc. 08/2009
with the device name and
GSurf – Replay Tool & Electronic Map
Device Browser
Electronic Map
Page 16 of 18
Advertisement
Table of Contents
