Related Manuals for Grandstream Networks Virtual Printer Driver Install
Summary of Contents for Grandstream Networks Virtual Printer Driver Install
- Page 1 1. Install the Virtual Printer Driver 1. Open the control panel, click on the “Add printer” icon, the welcome dialog box will appear: Click “Next”...
- Page 2 Select “Local printer attached to this computer.” Do NOT select “Automatically detect and install my Plug and Play printer”, click “Next” Select “Create a new port” and select “Local Port” from the drop down menu, click “Next” when done. Enter a port name (the port name can be arbitrary), click “OK”...
- Page 3 Click “Have Disk”, and browse to your directory of virtual printer driver Choose the directory where the virtual printer driver is located:...
- Page 4 Select “vprinter.inf” and click Open. The following dialog box will load: Click “OK”...
- Page 5 Once a driver is selected, then click “Next” You can enter a printer name or use the default name, click “Next”...
- Page 6 If you want to share the printer, select the “Share name” option and enter a name. Click “Next” when done. You can also describe the location and capabilities of the printer, click “Next” when done.
- Page 7 To confirm the printer is installed properly, you can print a test page, click “Next” when done. Click on “Finish”.
- Page 8 A message will appear stating “the virtual printer has not passed windows Logo testing;” Click “Continue Anyway” Install “vPrinerSrv” Service run “install.bat”, a dos dialog box will appear briefly. You will know that the service is successfully installed when it disappears. Unistall “vPrinerSrv”...
- Page 9 2. Configure the Virtual Printer Right click the virtual printer icon after the installation process and select the “Properties” menu. Click the “vPrinter Setting” tab and enter your IP-PBX IP address, caller number, caller password, choice a temporary directory, and print task track program all path, click “OK”. You must reboot your system after configuring the printer settings for the changes to take effect.
- Page 10 3. Use the Virtual Printer Open the document that you want to fax and click “Print” in the file menu. Select “Virtual printer” or the name that you gave to it, and then click “OK”. A pop-up window will ask you for the fax destination, enter it and click submit. Important: - The destination number must include the outbound prefix for the trunk that you wish to use..