Gxv3501/Gxv3504 Status Page - Grandstream Networks GXV3501 User Manual

The default value is 5060.
Local RTP Port – This parameter defines the local RTP-RTCP port pair that is used to
listen and transmit. The default value is 5004.
5. Click Save to save all the changes. You need to restart the device to apply all changes.
SIP Open Door Settings–
Enable SIP open door – This will close the DO
connections in the back to close the circuit
connected to it.
Key to open the door – DTMF key to close the circuit. Digits 0-9 only.
Delay lock time (seconds) – This is the time in seconds that the circuit will remain closed
when this function is triggered
Configure Phone List Page
To make sure the GXV3501/GXV3504 can make phone calls to the number you preferred
when alarm is triggered. You need to add number to the phone list.
Steps to add phone number:
1. From the GXV3501/GXV3504 home page, click Basic Settings > SIP.
2. Go to Phone List Tab.
3. Enter the Phone number and name, click Add a Number to save all the changes.
4. Numbers added to the system will be listed in this page.
Available phone
numbers
With current firmware, only the first phone number in the list will be called when an
NOTE:
alarm is triggered.

GXV3501/GXV3504 Status Page

Firmware 1.0.4.6
Grandstream Networks, Inc. 09/2010
GXV3501/GXV3504 Digital Video Server
Only applicable on GXV3501
.
Page 22 of 36