Setting The Alarm - Grace Digital VICTORIA GDI-IRN1941 User Manual

7. Turn the knob until the correct time zone is seen on the display. Push the 'Select' button to set your
time zone. Then turn the Menu knob until the hour setting is correct, and then press the 'Select'
button.
8. Turn the knob until the minute setting is correct, then press the 'Select' button.
The display shows <Set Time> with the new time shown beneath for 3 seconds, then returns to the
menu, press the 'Back' button 2 times to go to the main menu.

Setting the alarm

1. Press the 'Select' button.
NOTE: IF you make a mistake at any point, press the BACK button to go back to the previous screen
2. Turn the knob until the display shows <Alarm Clock>
3. Press the 'Select' button.
4. Turn the knob until the display shows <Set Alarm>
21
Set Time
1:30 PM
Set Time
1:34 PM
Stations
< Alarm Clock
Media Player
>