Table of Contents
Advertisement
2. UNPACKING
You will find in the packaging (see note):
- The Universal player itself,
- The power cord.
- This user manual.
NB: If you need to return the player to the factory or to your local representative for a warranty repair, please note that it must be
repackaged in the original packing. This packaging has been designed specifically to protect the Eidos 36. Use of alternative packaging
is likely to result in damage, invalidating warranty.
3. POWER SUPPLY VOLTAGE SELECTION
The power supply of your unit has been adjusted to operate with the AC voltage of your area. Check on the back panel of the unit if in
any doubt. If you move after purchasing the Universal player to an area using different mains voltage, do not forget to switch the back
panel selector to the new voltage of your area. The unit can operate at 50 or 60 Hz mains.
4. CHOICE OF THE UNIVERSAL PLAYER LOCATION
Due to the specific quality of its Goldmund "Mechanical Grounding" construction, the Goldmund Eidos 36 Player is less critical than
other designs in placement selection. Feedback is mostly so low that no special precaution is required. Nevertheless, position the
player as far as you can from the speakers if you want to totally avoid the air coupling between the speakers and the player.
Locate the Player to provide the most rigid possible connection to the building construction. Solid coupling is essential and the support
used (Rack, Table, Shelf) must be as rigid and solid as possible.
5. POWER CONNECTION
Plug the AC power cord to the back of the Eidos 36 and in a wall socket. Switch the back power switch to ON. The front display will light
up as soon as you press any key or when pressing the remote control STANDBY button, meaning the unit is now powered on.
6
Advertisement
Table of Contents
