Component Out; Still Picture - Goldmund EIDOS 36 User Manual

Component Out

• Default setting: Interlace
You only need to make this setting if you connected this player to your TV using the component video outputs.
If you have a progressive-scan compatible TV, set this to Progressive for flicker-free video output. If your TV is not compatible with
progressive-scan video, set to Interlace. Check the operating instructions that came with your TV if you are unsure about this
compatibility.
Note:
- This player is compatible with both PAL and NTSC progressive scan formats. However, your TV must also be progressive scan
compatible to take advantage of this feature.
- The RGB setting in AV Connector Out below will automatically be switched off when the component video outputs are set to output
progressive-scan video.
S-video Out
• Default setting: S2
You only need to make this setting if you connected this player to your TV using an S-video cord.
If you find that the picture is stretched or distorted on the default S2 setting, try
changing it to S1.

Still Picture

• Default setting: Auto
This player uses one of two processes when displaying a still frame from a DVD disc. The default Auto setting automatically chooses
the best setting each time.
• Field – produces a stable, generally shake-free image.
• Frame – produces a sharper image, but more prone to shake than field stills.
35